Our 60" skid steer style grapple rakes are available with 8 each, 1/2 " thick bottom teeth. Each tooth is cut from one piece of plate steel, not pieced together and welded like some rakes on the market.  We run two sections of heavy wall tubing through each tooth and then weld them 360 degrees on both sides.  Then we reinforce that with 1/2"gussets on both sides and weld them solid, top and bottom.  We use 1/2" teeth for the top grapple also.  Our main frame is 3-1/2" x 3-1/2" x 1/4" square tubing.  We use one, 2500lb welded hydraulic cylinder to provide all the clamping power that you need.  All pivot points have grease fittings for smooth operation and long life.  Our 60" rakes will fit skid steer machines such as, ASV, Bobcat, Caterpillar, John Deere, New Holland and other skid steer machines with the universal style attachment plate.  Our 60" skid steer style grapple rakes with also fit farm and utility tractors such as Branson, Kubota, Mahindra, New Holland and others with the universal skid steer style attachment plate. We also make this rake to fit John Deere farm and utility tractors with the 200, 300, or 400 series loader, with the quick detach system. 

 Our 66" skid steer style grapple rake has 8 each 3/4" thick bottom teeth. Each tooth is cut from one piece of plate steel, not pieced together and welded like some rakes on the market.  We run two sections of heavy wall tubing through each tooth and then weld them 360 degrees on both sides.  Then we reinforce that with 1/2"gussets on both sides and weld them solid, top and bottom.  We use 3/4" teeth for the top grapple.  Our main frame is 3-1/2" x 3-1/2" x 1/4" square tubing.  Our 66" rake has two independent top grapples with cylinder protection plates.  Each grapple has one, 2500lb welded hydraulic cylinder to provide all the clamping power that you need.  All pivot points have grease fittings for smooth operation and long life.  Our 66" rakes will fit skid steer machines such as, ASV, Bobcat, Caterpillar, John Deere, New Holland and other skid steer machines with the universal style attachment plate.  Our 66" skid steer style grapple rakes with also fit farm and utility tractors such as Branson, Kubota, Mahindra, New Holland and others with the universal skid steer style attachment plate. We also make this rake to fit John Deere farm and utility tractors with the 500 series loader, with the quick detach system. 

 Our 72" skid steer style grapple rake has 10 each, 3/4" thick bottom teeth. Each tooth is cut from one piece of plate steel, not pieced together and welded like some rakes on the market.  We run two sections of heavy wall tubing through each tooth and then weld them 360 degrees on both sides.  Then we reinforce that with 1/2"gussets on both sides and weld them solid, top and bottom.  We use 3/4" thick teeth for the top grapples.  Our main frame is 3-1/2" x 3-1/2" x 1/4" square tubing.  Our 72"rake has two independent top grapples with cylinder protection plates.  Each grapple has one, 2500lb welded hydraulic cylinder to provide all the clamping power that you need.  All pivot points have grease fittings for smooth operation and long life.  Our 72" rakes will fit skid steer machines such as, ASV, Bobcat, Caterpillar, John Deere, New Holland and other skid steer machines with the universal style attachment plate.  Our 72" skid steer style grapple rakes with also fit farm and utility tractors such as Branson, Kubota, Mahindra, New Holland and others with the universal skid steer style attachment plate. We also make this rake to fit John Deere farm and utility tractors with the 500 series loader, with the quick detach system.